Peugeot 308 Key Fob Replacement
Peugeot's 308 could be catching on a bit but it's still eye-catching. It's not the most luxurious car in its class It's it's a Ford Focus or Volkswagen Golf will help you stay away from imperfections on the road - but it's a relaxed and a civilized drive.
We are often asked at Coded Car Keys to replace peugeot key fobs. The following tips can aid whether the issue is ongoing or intermittent.
Water Damage
If you accidentally drop your key fob in a puddle or splash it with water during kayaking, swimming, canoeing, rafting or canyoning, it's probably to sustain water damage. The best way to prevent this from happening is to keep it in a dry, dry bag when you're outside or performing things where the fob might be exposed to high levels of water.
You'll also need to ensure that the fob is completely dry prior to opening it and reusing it. If you detect any odors from the fob (such as industrial fluid or windshield washer fluid) This is a further indicator that it is submerged.
A circuit that is wet can cause the battery's energy to drain or even explode. If you're able to fish your key fob 308 out from the body of water it got stuck in turn the button upside down and shake out as much water as you can before opening the case. Take the battery out, and then wipe the circuit board down with a cotton swab, which has been submerged in 90 percent alcohol.
Other reasons your Peugeot 308 remote keyless entry system that you use to enter your home may not function include a dead battery for your coin, receiver module issues, signal interference, or a faulty electronic chip. If none of these causes the cause, you can try resetting your system by disconnecting the battery with 12 volts for approximately 15 minutes.
Dead Coin Battery
Peugeot cars are equipped with a remote start system that allows the driver to start the car from afar and then warm up or cool down the vehicle prior to entering. This feature is extremely useful, especially during cold winter months. Remote start systems may cease to function for a variety reasons, such as a dead coin-battery.
The coin-shaped battery inside the key fob will last between two and four months, depending on how frequently it is used, where it was purchased, and how it is utilized. The date of use is typically printed on the packaging or marked in the manual.
If the key fob stopped functioning after exposure to water that is clean then you must remove the battery, clean the chip using a paper towel and isopropyl Alcohol, then dry it completely before replacing it. In the event of exposure to salty or soapy water, the chip may be damaged and you'll have to replace the key fob entirely.
If you're not sure if the battery is defective you can check its voltage with a multimeter that is connected to both the minus and plus terminals. The voltage should be around 12-13 volts, but if it is lower, then the battery needs to be replaced. Alternatively, you can try to reset the onboard computer by disconnecting the battery with 12 volts for a couple of minutes, and then reconnecting it in reverse order (positive cable first followed by negative). The engine should then start.
Faulty Receiver Module
If you don't see "Key Detected" It could be the receiver module not working properly. It is the part which sends out an alert when your key fob is activated. It also functions as an alarm and prevents the car from starting if it doesn't have the correct key.
The cause could be a number of causes, such as water damage or simply aging. If your Peugeot 308 key fob was exposed to dirty tap water, as in the electronic chip inside is damaged. In this instance you'll need to remove off the battery and clean it thoroughly using isopropyl alcohol, or electronic cleaner. Once it's dry, you can put the battery back in and test it again.
If the issue is not resolved, it is a good idea that you visit an area Peugeot expert or locksmith. They can use an instrument for diagnosing to identify the issue and repair it.
peugeot 207 new key is stressful to lose your Peugeot car key. A professional auto locksmith will be able to solve the problem within minutes. They can cut a brand new key and then program it into your vehicle, so you're off the road as quickly as possible. Click here to find a local locksmith near you.
Faulty Electronic Chip
The electronic chip inside the Peugeot 308 key fob is an important component of the remote control system. If it gets damaged, your car may not start, or you could receive a message saying "anti-theft active". If this occurs, the only option to fix the issue is to get a new key. Professional auto locksmiths are able to provide the service in the shortest time.
The chip inside your Peugeot 308 key fob can become faulty due to sweat, water damage dirt, or other reasons. If your Peugeot key fob has been exposed to soapy or dirty water, it must be cleaned promptly. You can wipe the electronic component using a paper towel soaked in isopropyl Alcohol. Then, you need to allow the battery to completely dry.
Sometimes keys can stop working because of radio interference. This can be caused by other devices that operate on the same frequency as your Peugeot key fob. This can be caused by bad conditions or objects within the vicinity of the vehicle. If you encounter this issue it is advised to visit the Peugeot dealership.
The Peugeot Key Fob 207/308 is delicate and requires particular care. It is not recommended to drop it or throw it around. If you lose it, try to locate it as quickly as you can. You can reset all on-board computers by disconnecting the 12 volt battery for a short period of time. Disconnect the negative cable before the positive.